redturner
|
posted on 16/1/16 at 01:18 PM |
|
|
Pels metalworker
Sadly we dont have a give away page so if any-one would like to collect our Pels metalworker they can have it. It is a LARGE machine and has new
blades and you will need some decent transport. It will chop through 10mm plate, 4" angle and can accept a Munton block to punch out what ever
you desire...It is in Derbyshire / Nottinghamshire area
|
|
|
AdrianH
|
posted on 16/1/16 at 04:48 PM |
|
|
Any model number or pictures please.
I doubt I could house it but may know some that could.
Adrian
[Edited on 16-1-16 by AdrianH]
Why do I have to make the tools to finish the job? More time then money.
|
|
redturner
|
posted on 16/1/16 at 05:23 PM |
|
|
We would prefer it to go to an amateur mechanic much like us. This is a great machine with years of work left in it but will need a team and a decent
truck to move it.
|
|
redturner
|
posted on 16/1/16 at 05:25 PM |
|
|
p.m me your email address and I will let you have a picture, too much hassle to put one on the site.....
|
|
AdrianH
|
posted on 16/1/16 at 05:25 PM |
|
|
Fair enough was going to let guys know on the Mig-welding forum as there are lots of amateur people on there as well as jobbing welders that could
have probably housed it and put to good use, it would not fit in my workshop that is for sure.
ADrian
Why do I have to make the tools to finish the job? More time then money.
|
|
redturner
|
posted on 16/1/16 at 05:37 PM |
|
|
Let them know and I will sort it out from there.....
|
|
NigeEss
|
posted on 16/1/16 at 05:45 PM |
|
|
Sounds rather useful and I have a large garage
Can I have a pic or two as well please ?
Time is an illusion. Lunchtime doubly so.................Douglas Adams.
|
|
AdrianH
|
posted on 16/1/16 at 05:53 PM |
|
|
looks like already on there some one else from there also saw it.
Adrian
Why do I have to make the tools to finish the job? More time then money.
|
|
redturner
|
posted on 16/1/16 at 06:37 PM |
|
|
quote: Originally posted by NigeEss
Sounds rather useful and I have a large garage
Can I have a pic or two as well please ? [/quote send me a msg at davehunter13
athotmail.com and I will send a picture.....
[Edited on 16/1/16 by redturner]
|
|
AdrianH
|
posted on 16/1/16 at 07:36 PM |
|
|
sent you an email for a pic, you have interest on the forum from a few guys.
Adrian
Why do I have to make the tools to finish the job? More time then money.
|
|
redturner
|
posted on 16/1/16 at 08:53 PM |
|
|
The PELS has now gone.....thanks for the interest.....
|
|