scutter
|
 posted on 4/9/05 at 10:40 AM |
|
|
Zetec engine height
Well i've only done 40 test miles around camp, haven't even past SVA and i'm thinking of an engine change, looking for more
reliability.
So Zetec's come into the frame(why not everyone else is).
The question is, Is there a differance in height between 1.8's and 2.0's?
Many thanks Dan.
|
|
|
|
|
Surrey Dave
|
| posted on 4/9/05 at 02:42 PM |
|
|
zetec dims
any use?
 
Rescued attachment zetec dimensions sml.jpg
|
|
|
scutter
|
| posted on 4/9/05 at 02:51 PM |
|
|
I've got that pic thanks Dave, may have to go scappies with my tape measure.
Would like to go 2.0L as size matters
ATB Dan.
|
|
|
bob
|
| posted on 4/9/05 at 02:59 PM |
|
|
I'll get the tape measure out on the 1800 i have.
 
Rescued attachment zetec pics 006.jpg
|
|
|
bob
|
| posted on 4/9/05 at 03:07 PM |
|
|
the 2 litre looks like this with a chopped sump and MT75 box attatched,thank zetec for the pic
 
Rescued attachment 04740003.jpg.small.jpg
|
|
|
donut
|
| posted on 4/9/05 at 03:09 PM |
|
|
I'll get the tape measure out on my 2 litre........
From very bottom of std sump to top of cams 615 mm (ish)
From sump gasket where it meets the block to top of cams 400mm (ish)
Hope this helps
Andy
When I die, I want to go peacefully like my Grandfather did, in his sleep -- not screaming, like the passengers in his car.
http://www.flickr.com/photos/andywest1/
|
|
|
scutter
|
| posted on 4/9/05 at 03:33 PM |
|
|
Cheers fellas, looks like they are the same size, from Daves picture the 1800 height is 666mm (must be a ford joke).
Time to start looking for a 2L lump.
Atb Dan.
|
|
|
Deckman001
|
| posted on 4/9/05 at 03:38 PM |
|
|
Get it through sva first Dan then throw the 1700 my way !!
Jason
|
|
|
scutter
|
| posted on 4/9/05 at 03:45 PM |
|
|
I'll bear that in mind Jason, as i need to fund the purchase of some 45's
ATB Dan.
|
|
|
Deckman001
|
| posted on 4/9/05 at 04:36 PM |
|
|
I could px three sets of 40's !!
Jason
|
|
|
