GTO
|
 posted on 11/5/03 at 09:16 AM |
|
|
Pinto EFI to carbs
i have a 2.0L pinto which is running on EFI but i realy want carbs
is this a hard job chageing the ign etc.
|
|
|
|
|
theconrodkid
|
| posted on 11/5/03 at 02:08 PM |
|
|
the dizzy has no advance,it is all done by the ecu,you can change the dizzy to carb type,the rest is straight forward though there was mention of a
prob where the injector cut outs were in the head. ill have the inlet if u want to get rid of it
who cares who wins
pass the pork pies
|
|
|
GTO
|
| posted on 11/5/03 at 09:41 PM |
|
|
if thats the case i got a full injection system here for sale if anone wants it or will work somthing out with a swap for carbs/ignition
|
|
|
chrisg
|
| posted on 11/5/03 at 10:01 PM |
|
|
You really need a carb head as the inlet ports are round as opposed to pear shaped on the injection head. although you can get round it with an
adaptor plate.
I THINK conrod wants an injection system.
cheers
Chris
Note to all: I really don't know when to leave well alone. I tried to get clever with the mods, then when they gave me a lifeline to see the
error of my ways, I tried to incite more trouble via u2u. So now I'm banned, never to return again. They should have done it years ago!
|
|
|
theconrodkid
|
| posted on 12/5/03 at 07:04 PM |
|
|
who,s side u on chris?
who cares who wins
pass the pork pies
|
|
|
