Cobra289
|
| posted on 7/6/08 at 10:19 PM |
|
|
2D or 3D Sierra Front Upright
Hi,
I am designing the front suspension, based on the Book but the donor will be a Sierra.
Perhaps you can help me with the drawings of the upright in 2D AutoCAD or 3D [SolidWorks] or equivalent.
Regards,
Cobra289
|
|
|
|
|
chrisg
|
| posted on 8/6/08 at 01:16 PM |
|
|
I have this
I also have a very rough 3d model in sketchup, or save some time and buy my book - it's Sierra based.
cheers
Chris 
[Edited on 8/6/08 by chrisg]
Note to all: I really don't know when to leave well alone. I tried to get clever with the mods, then when they gave me a lifeline to see the
error of my ways, I tried to incite more trouble via u2u. So now I'm banned, never to return again. They should have done it years ago!
|
|
|
Cobra289
|
| posted on 8/6/08 at 02:04 PM |
|
|
quote:
Originally posted by chrisg
I have this
I also have a very rough 3d model in sketchup, or save some time and buy my book - it's Sierra based.
cheers
Chris
[Edited on 8/6/08 by chrisg]
Thanks Chris!
Is this picture part of your book?
I am waiting for 4 weeks for the new Ron Champion book.
Can I order from you and pay via PayPal??? that will speed-up the shipping to the Netherlands.
Time is not a problem, I enjoy doing this design in SolidWorks.
Just did put these dimensions in my simulation and found some interesting things. Perhaps you did it in different way.
Found:
Ron book has 185 mm distance between the top and bottom arms [front]
To get a reasonable RC I will be forced to change this height to 170 mm.
Bah! I am talking about my design that use probably different wheels ET and tires and a different track.
Here is a picture of my 3D model.
Regards,
Cobra289
http://www.donostia.demon.nl
https://forocoches.com/foro/showthread.php?t=1699619
|
|
|
