sdh2903
|
| posted on 17/9/15 at 03:00 PM |
|
|
Mx5 based wilwood group buy anyone?
Just gauging interest at present. I'm currently trying to put together a little discount deal on a front wilwood setup for mx5 based cars or
mx5's themselves.
The kit I'm looking at uses corrado 280mm discs and Dynalite calipers. If used in an mx5 there is also an option for hel braided front lines.
The discs are available in plain, dimpled, drilled or grooved at no extra cost. With this kit 15" alloys will be needed for clearance. All kits
come with all the mounting hardware and brackets and will fit all mk1 and mk2 both 1.6 and 1.8 variants.
Prices without group buy is £521.50 Inc vat and delivery for discs calipers and a set of ferodo ds2500 pads.
If I can get 5 orders together the prices will be as follows:
Dynalites, discs, braided hoses and ds2500 pads =£472 delivered
Dynalites, discs and ds2500 pads = £442 delivered
Dynalites and discs. No hoses no pads = £402 delivered
Wilwood bp10 pads are available instead of ds2500s at a reduction of 20 quid.
Also available is an anti rust paint coating for the discs in a choice of black silver or gold for £13 extra.
These are a pretty good alternative to the powerlite kit offered by rally design and work out slightly cheaper when you factor in pads which the RD
kits don't come with.
Any body interested?
[Edited on 17/9/15 by sdh2903]
[Edited on 18/9/15 by sdh2903]
|
|
|
|
|
sdh2903
|
| posted on 17/9/15 at 06:37 PM |
|
|
More details of the kit:
http://www.freakyparts.co.uk/epages/es120337.mobile/en_GB/?ObjectPath=/Shops/es120337_es124285571161/Products/MX5_Wilwood_01/SubProducts/MX5_Wilw
ood_01-0003
|
|
|
ste
|
| posted on 17/9/15 at 10:06 PM |
|
|
Any chance of getting in a kit for sierra front hubs on 15" wheels? can you ask for a price as part of the group buy, It might help you with
numbers.
thanks
|
|
|
sdh2903
|
| posted on 18/9/15 at 06:49 AM |
|
|
I shall certainly ask the question
|
|
|
Rosco86
|
| posted on 18/9/15 at 07:24 AM |
|
|
I'm after some powerlite ds2500 pads if possible?
My Build Thread
|
|
|
thefreak
|
| posted on 18/9/15 at 10:33 AM |
|
|
Hi Guys,
We're the company who make the kits, so I'll answer any questions rather than relaying through Steven, be easier (and probably quicker).
We can do something for the Sierra front hubs with 15" wheels sure, we'd need a hub to design the kit on. It would be a bit more for the
kit compared to the MX5 kit as there's some dev time involved for the brackets, but if there's interest I can get the calipers cheaper,
I'd just need a deposit (and a hub  )
Regarding the Powerlite DS2500s, if you're ok waiting, I can add them to the order and save a bit on the shipping costs, but without ordering 5x
sets they don't offer much in the way of a discount. They work out around £74.00 delivered but can get a bit cheaper if ordering more.
Any questions about this kit though, ask away.
|
|
|
thefreak
|
| posted on 18/9/15 at 10:38 AM |
|
|
Pic of the kit here:
|
|
|
sdh2903
|
| posted on 20/9/15 at 02:50 PM |
|
|
Guess I'm paying full price then Stewart
|
|
|
ash_hammond
|
| posted on 20/9/15 at 04:45 PM |
|
|
I would be interested in a Sierra based kit.
.: www.mac1motorsports.co.uk | www.m1moc.com :.
|
|
|
.JPG)
