Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: MSVA - IVA style brake information labels
russbost

posted on 22/8/18 at 10:59 AM Reply With Quote
MSVA - IVA style brake information labels

Just been checking the MSVA manual & I can't find any reference to the labels about using Dot 4 Brake fluid from a sealed container & if using a dual master cylinder setup there used to be one for IVA which said something about not interfering with the brake bias?

I take it these are not a MSVA requirement - strangely I couldn't find them anymore in IVA either

Also, for MSVA there doesn't appear to be any requirement for a tell tale for low brake fluid - have I got that right, you just need to be easily able to check the fluid level?





I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours. http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1

NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
View User's Profile Visit User's Homepage View All Posts By User U2U Member
loggyboy

posted on 22/8/18 at 11:56 AM Reply With Quote
Page 92 of the latest IVA manual.





Mistral Motorsport

View User's Profile View All Posts By User U2U Member
russbost

posted on 22/8/18 at 04:27 PM Reply With Quote
quote:
Originally posted by loggyboy
Page 92 of the latest IVA manual.


Looking at the online version, it doesn't have continuous page no.'s it's page 6 of 7 etc. what section no. & decimal is that please?

Also can anyone advise re MSVA?





I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours. http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1

NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
View User's Profile Visit User's Homepage View All Posts By User U2U Member
gremlin1234

posted on 22/8/18 at 06:06 PM Reply With Quote
quote:
Originally posted by russbost
quote:
Originally posted by loggyboy
Page 92 of the latest IVA manual.


Looking at the online version, it doesn't have continuous page no.'s it's page 6 of 7 etc. what section no. & decimal is that please?

Also can anyone advise re MSVA?


IVA
section 09D RS 17

quote:

17. An indelible label must be affixed in a visible position within 100 mm of the filling ports of the fluid reservoirs to ensure that it is possible for the end user of the vehicle to identify the brake fluid used in braking system. DOT fluid references and/or the Symbols and text in Table 1 are considered acceptable.


View User's Profile View All Posts By User U2U Member
russbost

posted on 22/8/18 at 06:22 PM Reply With Quote
Great thanks, is the "don't interfere with brake bias still in or has that gone now?





I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours. http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1

NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
View User's Profile Visit User's Homepage View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.