philw
|
| posted on 2/1/09 at 06:53 PM |
|
|
Savage switch
I would like to wire my start button so the light comes on with the ignition, then when i start it the light goes out, any ideas?
[Edited on 2/1/09 by philw]
Must try harder
|
|
|
|
|
tomgregory2000
|
| posted on 2/1/09 at 06:56 PM |
|
|
just a random thought but what if you used the light as the alternator light?
that way the light will be on with ign but then go off when engine running? I think
|
|
|
McLannahan
|
| posted on 2/1/09 at 07:00 PM |
|
|
That's how David (FlakMonkey) wired his - I asked!
I intend to wire mine in a similar way but may use oil pressure instead? (BEC)
|
|
|
philw
|
| posted on 2/1/09 at 07:01 PM |
|
|
Yeah, i was thinking along those lines, i will go and do it now.
Cheers guys
Must try harder
|
|
|
blakep82
|
| posted on 2/1/09 at 08:10 PM |
|
|
oooh a VERY nice idea!
you have to have a charging light for SVA don't you? with correct markings on it? how does that work? would you have to lights? one on the dash
with the correct symbol, and the start button also?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
philw
|
| posted on 3/1/09 at 01:56 PM |
|
|
All sorted, i now have the normal batt/alternator warning light, and the start button which goes out when running
Must try harder
|
|
|
mr_pr
|
| posted on 3/1/09 at 05:02 PM |
|
|
How is this done on a BEC then?
Sounds like a cool thing to do!
.JPG)
My Build Progress
|
|
|
