Printable Version | Subscribe | Add to Favourites
New Topic New Reply
Author: Subject: mounting polo radiator
l0c0st

posted on 4/10/08 at 09:18 AM Reply With Quote
mounting polo radiator

I was planning on mounting my polo rad with a couple of brackets made from 4mmx25mm steel rivnutted to the chassis.

The radiator would be sitting on top of the bracket, roughly 4 or 5 inches away from the chassis, so there would be quite a lot of leverage. The top of the rad would be held in place with aluminium brackets, so the lower ones would be taking most of the weight.

That's what I'm planning, but would it be strong enough? How have others mounted their radiators?

Preferably without any welding involved.

Cheers Dom

Edited to add picture, which will hopefully make it clearer. Viewed from the front of the car.


rad mounting
rad mounting


[Edited on 4/10/08 by l0c0st]

View User's Profile View All Posts By User U2U Member
SyKaTurbo

posted on 4/10/08 at 09:33 AM Reply With Quote
Bob has some good pics in his archive. I did mine in a similar way to him and its very sturdy.

bottom mount
bottom mount


n/s rad
n/s rad


[img][/img]






View User's Profile View All Posts By User U2U Member
NS Dev

posted on 4/10/08 at 09:52 AM Reply With Quote
I used the bosses same as syka turbo in photos above, just tapped em out for M6 bolts





Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion retro car restoration and tuning

View User's Profile Visit User's Homepage View All Posts By User U2U Member
jollygreengiant

posted on 4/10/08 at 12:36 PM Reply With Quote
I made an alli mounting plate that bolts to the front of the chassis after the rad is bolted to it and mounted onto the locating lugs at the bottom.

Rad mounting plate from bacl/bottom
Rad mounting plate from bacl/bottom


fitted to car
Rad & mounting plate on car
Rad & mounting plate on car






Beware of the Goldfish in the tulip mines. The ONLY defence against them is smoking peanut butter sandwiches.

View User's Profile View All Posts By User U2U Member
SyKaTurbo

posted on 4/10/08 at 01:54 PM Reply With Quote
Awesome bit of work there!






View User's Profile View All Posts By User U2U Member
bimbleuk

posted on 4/10/08 at 02:34 PM Reply With Quote
Not as nice as the above effort but on my Striker I hold the Polo rad and intercooler plus aluminium shroud with 4 simple brackets. been like that for 18 months.

Revised Radiator location
Revised Radiator location

View User's Profile View All Posts By User U2U Member
l0c0st

posted on 4/10/08 at 08:55 PM Reply With Quote
Thanks for all of the replies. Very useful info.

Dom

View User's Profile View All Posts By User U2U Member

New Topic New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.